WCDMA Link Budget

Go down

WCDMA Link Budget Empty WCDMA Link Budget

Post  Admin on Wed Feb 24, 2010 10:07 am

[You must be registered and logged in to see this link.]

budget planning is part of the network planning process, which helps to
dimension the required coverage, capacity and quality of service
requirement in the network. UMTS WCDMA macro cell coverage is uplink
limited, because mobiles power level is limited to (voice terminal
125mW). Downlink direction limits the available capacity of the cell,
as BTS transmission power (typically 20-40W) has to be divided to all
users. In a network environment both coverage and capacity are
interlinked by interference. So by improving one side of the equation
would decrease the other side. System is loosely balanced by design.
The object of the link budget design is to calculate maximum cell size
under given criteria:

# Type of service (data type and speed)
# Type of environment (terrain, building penetration)
# Behavior and type of mobile (speed, max power level)
# System configuration (BTS antennas, BTS power, cable losses, handover gain)
# Required coverage probability
# Financial and economical factors (use of more expensive and better quality equipment or not the cheapest installation method)

and to match all of those to the required system coverage, capacity and quality needs with each area and service.

an urban area, capacity will be the limiting factor, so inner city
cells will be dimensioned by required Erlangs/kmĀ² for voice and data.
Even using 25dB as inbuilding penetration loss into the building core
area, link budget would typically allow about 300m cell range, which is
a way too much for a capacity purposes. In a rural area uplink power
budget will determine the maximum cell range, when typically cells are
less congested. A typical cell range in rural areas will be several
kilometers depending on a terrain.

Below is an example of how
WCDMA voice call link budget can be done. Some of the values can be
debated, including the propagation model, but it gives an idea of the
calculation methods.
[You must be registered and logged in to see this link.]


Posts : 10
Join date : 2010-02-23


Back to top Go down

Back to top

Permissions in this forum:
You cannot reply to topics in this forum